JEFFCO sp101
1:1 Adhesive and Sealant
Back to
Civil Engineering page
System SKU: sp101
System Category:
Civil Engineering
DESCRIPTION:
Jeffco 101 is a “sand” colored, highly flexible epoxy adhesive and sealant for use with similar and dissimilar materials. Jeffco 101 may be applied on overhead and vertical surfaces up to ¼” thick, nominally, without running or sagging. Excellent chemical resistance and 150% elongation makes
Jeffco 101 a perfect solution for hundreds of applications. The convenient color-coded (“A” dark brown and “B” white) 1:1 volumetric mix ratio is user friendly. Jeffco 101 is a 100% solids formulation containing no solvents, low toxicity and low cure odor.
APPLICATIONS:
Use Jeffco 101 to bond or seal similar or dissimilar materials such as concrete, metals, wood, glass, ceramic, and many plastics.
Jeffco 101 also finds use as a flexible joint filler and general purpose caulking compound for civil engineering applications.
SUGGESTIONS FOR USE:
Jeffco 101 bonds well with minimal surface preparation and in the presence or moisture but it is recommended to remove contaminates such as standing water, rust, and dirt. Substrate sanding or scuffing will enhance bond capabilities.
Use Jeffco 101 between 45°F and 100°F. Thoroughly mix part “A” (dark brown) and part “B” (white) until a consistent “sand” color is achieved. Apply the mixed Jeffco 101 by trowel or putty knife to the desired thickness. Clamp or apply pressure if possible when using
Jeffco 101 as a glue. Surfaces are tack free with good “green” strength development in 3.0 hours. Jeffco 101 bond strength will fully develop within 48 hours at ambient temperatures. |
| PROPERTIES OF sp101 SYSTEM LIQUID PROPERTIES (77ºF): |
Minimum |
Maximum |
| Resin Viscosity (Part "A")
|
|
|
| Hardener Viscosity (Part "B")
|
|
|
| Mixed Viscosity
|
73,000
|
73,000
|
| Mix Ratio
, Part
|
1
:1
|
1
:1
|
| Pot Life, minutes @ 77ºF
|
20
|
20
|
| Weight Per Gallon, Resin
Part “A” (lbs.)
|
9.2
|
9.2
|
| Weight Per Gallon, Hardener
Part “B” (lbs.)
|
8.1
|
8.1
|
Color, Resin
|
|
Color, Hardener
|
|
|
CURED PHYSICAL PROPERTIES OF NEAT RESIN:
| NEAT RESIN CURED PROPERTIES OF sp101 SYSTEM: |
Minimum |
Maximum |
| Shore D Hardness
|
|
|
| Tensile Strength
|
|
|
| Flexural Strength
|
|
|
| Compressive Strength
|
|
|
| HDT, ºF
|
|
|
| Elongation
|
|
|
|
SUPPLIED AS PACKAGED KITS:
1 gallon, 2 gallon, 10 gallon
Back to
Civil Engineering page
The information contained herein is offered without charge
for use by technically qualified personnel at their discretion and risk.
All statements, technical information and recommendations contained herein
are based on test and data which we believe to be reliable, but the accuracy
or completeness thereof is not guaranteed and no warranty of any kind
is made with respect thereto. Always read, understand, and comply with
hazard warnings described in the products' Material Safety Data Sheet(s)
before use.
|
