JEFFCO sp121
1:1 Structural Adhesive
Back to
Civil Engineering page
System SKU: sp121
System Category:
Civil Engineering
DESCRIPTION:
JEFFCO 121 is a high strength structural epoxy adhesive for the quick bonding of similar and dissimilar materials. JEFFCO 121 bonds with an immediate high tack consistency, a medium pot life and a quick cure time. High tack and thixotropy also makes “121” excellent for many vertical or overhead applications. The convenient color-coded (“A” black and “B” white) 1:1 volumetric mix ratio is user friendly. With low odor and toxicity, JEFFCO 121 is solvent free, 100% solids and DOT non-regulated.
APPLICATIONS:
Use JEFFCO 121 to bond or glue similar or dissimilar materials such as fiber laminates, concrete, metals, wood, glass, ceramic, and many plastics.
SURFACE PREPARATION: JEFFCO 121 bonds well with minimal surface preparation and in the presence or moisture but it is recommended to remove contaminates such as standing water, rust, and dirt. Substrate sanding or scuffing will enhance bond capabilities. JEFFCO 121 does not bond well to some untreated plastics or to surfaces contaminated with petroleum products.
DIRECTIONS FOR USE: Use JEFFCO 121 between 45°F and 100°F. Thoroughly mix parts “A” (black) and “B” (white) until a consistent gray color is achieved. Apply the mixed
JEFFCO 121 by trowel or putty knife to the desired thickness. Clamp or apply pressure if possible. Surfaces are tack free with good “green” strength development in 2.5 hours. JEFFCO 121 bond strength will fully develop within 48 hours at ambient temperatures.
ADDITIONAL PROPERTIES OF JEFFCO 121:
“Green” Strength Development @ 77°F 2.5 hours
Full Cure Time 24 - 48 hours
Tensile Lap Shear 3,000 (psi)
Peel Strength 34-45 (pli) |
| PROPERTIES OF sp121 SYSTEM LIQUID PROPERTIES (77ºF): |
Minimum |
Maximum |
| Resin Viscosity (Part "A")
|
|
|
| Hardener Viscosity (Part "B")
|
|
|
| Mixed Viscosity
|
700,000
|
900,000
|
| Mix Ratio
, Part
|
1
:1
|
1
:1
|
| Pot Life, minutes @ 77ºF
|
20 |
20
|
| Weight Per Gallon, Resin
Part “A” (lbs.)
|
9.8
|
9.8
|
| Weight Per Gallon, Hardener
Part “B” (lbs.)
|
8.5
|
8.5
|
Color, Resin
|
|
Color, Hardener
|
|
|
CURED PHYSICAL PROPERTIES OF NEAT RESIN:
| NEAT RESIN CURED PROPERTIES OF sp121 SYSTEM: |
Minimum |
Maximum |
| Shore D Hardness
|
|
|
| Tensile Strength
|
|
|
| Flexural Strength
|
|
|
| Compressive Strength
|
|
|
| HDT, ºF
|
|
|
| Elongation
|
|
|
|
SUPPLIED AS PACKAGED KITS:
1 gallon, 2 gallon, 10 gallon
Back to
Civil Engineering page
The information contained herein is offered without charge
for use by technically qualified personnel at their discretion and risk.
All statements, technical information and recommendations contained herein
are based on test and data which we believe to be reliable, but the accuracy
or completeness thereof is not guaranteed and no warranty of any kind
is made with respect thereto. Always read, understand, and comply with
hazard warnings described in the products' Material Safety Data Sheet(s)
before use.
|
