JEFFCO 3159
4:1 PRESS MOLDING HARDENER
Back to
Hardener page
Product Description:
Cycloaliphatic/aliphatic blend. Designed for flexibility, impact resistance and bond strength with increased work life. 15-minute cycle time. Easy to use 4:1 volumetric mix. No VOC’s, 100% solids.
Product Uses:
RTM and press molded parts.
|
| PROPERTIES OF 3159 HARDENER (neat): |
Minimum |
Maximum |
| Gel Time: Gel Time (minutes@ 77°F, 75 grams)
|
|
|
| Viscosity: @ 77°F, cps
|
75
|
100
|
|
Color: (Gardener)
|
2+
|
|
Weight Per Gallon: (lbs.)
|
8.2
|
8.2
|
|
Weight Per Active H:
|
|
|
|
Mix Ratio: Parts Per 100 Resin (by weight, 4:1 volume)
|
22 |
22 |
|
Thin Film Cure Time: (minutes @ 175°F)
|
|
|
|
Thin Film Set Time: @ 175°F (minutes)
|
12
|
15
|
|
Cure Time: @ 75°F (hours)
|
|
|
|
Pot Life: (minutes @ 77°F, 75 grams)
|
25
|
30
|
|
TYPICAL CURED PROPERTIES WITH 1301, 1303, 1304T, 1310L-6, 1311 or 1319
|
Minimum |
Maximum |
|
Cure schedule: Gel @ ambient + 2 hours @ 212° F or 7 days at 77° F
|
|
HDT: (°F) ASTM D648-264
|
180
|
180
|
|
Shore D Hardness:
|
85
|
85
|
|
Barcol Hardness Units :
|
|
|
|
Flexural Strength: (psi)
|
17,870
|
17,870 |
|
Flexural Modulus: (psi)
|
-
|
|
|
Tensile Strength:
|
9,500
|
9,500
|
|
Tensile Modulus: (psi)
|
-
|
|
|
Elongation: %
|
5.5
|
5.5
|
|
Compressive Strength: (psi)
|
|
|
|
Bond Strength: psi ASTM C882
|
|
|
|
Water Absorption: %
|
|
|
|
Heat Deflection Temperature:
|
|
|
|
Heat Distortion Temperature: °C
|
|
|
|
Service Temperature: °F
|
225
|
225
|
|
Tensile Strain at Break: %
|
|
|
|
How Supplied:
Pails
Back to
Hardener page
The information contained herein is offered without charge
for use by technically qualified personnel at their discretion and risk.
All statements, technical information and recommendations contained herein
are based on test and data which we believe to be reliable, but the accuracy
or completeness thereof is not guaranteed and no warranty of any kind
is made with respect thereto. Always read, understand, and comply with
hazard warnings described in the products' Material Safety Data Sheet(s)
before use.
|
