JEFFCO 3180
1:1 FLEXIBLE EPOXY HARDENER
Back to
Hardener page
Product Description:
Medium pot life curing agent designed for impact and high strength flexibility. Easy to use 1:1 mix ratio by volume. No VOC’s, 100% solids.
Product Uses:
Flexible castings, adhesives, concrete repairs and potting/encapsulating compounds. |
| PROPERTIES OF 3180 HARDENER (neat): |
Minimum |
Maximum |
| Gel Time: Gel Time (minutes@ 77°F, 150 grams)
|
30
|
35
|
| Viscosity: @ 77°F, cps
|
4,000
|
5,000
|
|
Color: (Gardener)
|
5
|
|
Weight Per Gallon: (lbs.)
|
8.1
|
8.1
|
|
Weight Per Active H:
|
180
|
180
|
|
Mix Ratio: Parts Per 100 Resin (by weight, 1:1 volume)
|
85
|
85
|
|
Thin Film Cure Time: (minutes @ 175°F)
|
|
|
|
Thin Film Set Time: @ 77°F (hours)
|
3
|
4
|
|
Cure Time: @ 75°F (days)
|
7
|
7
|
|
Pot Life: (minutes @ 77°F, 150 grams)
|
|
|
|
TYPICAL CURED PROPERTIES WITH JEFFCO 1308NC and 1380 Resins
|
Minimum |
Maximum |
|
|
|
HDT: (°F) ASTM D648-264
|
45
|
45
|
|
Shore D Hardness:
|
50
|
50
|
|
Barcol Hardness Units :
|
|
|
|
Flexural Strength: (psi)
|
7,500
|
7,500
|
|
Flexural Modulus: (psi)
|
|
|
|
Tensile Strength: (psi)
|
3,250
|
3,250
|
|
Tensile Modulus: (psi)
|
|
|
|
Elongation: %
|
30.0
|
30.0
|
|
Compressive Strength: (psi)
|
|
|
|
Bond Strength: (psi) ASTM C882
|
|
|
|
Water Absorption: %
|
|
|
|
Heat Deflection Temperature:
|
|
|
|
Heat Distortion Temperature: °C
|
|
|
|
Service Temperature: °F
|
|
|
|
Tensile Strain at Break: %
|
|
|
|
How Supplied:
Gallons, Pails, Drums
Back to
Hardener page
The information contained herein is offered without charge
for use by technically qualified personnel at their discretion and risk.
All statements, technical information and recommendations contained herein
are based on test and data which we believe to be reliable, but the accuracy
or completeness thereof is not guaranteed and no warranty of any kind
is made with respect thereto. Always read, understand, and comply with
hazard warnings described in the products' Material Safety Data Sheet(s)
before use.
|
