JEFFCO 3193
15 Minute 2:1 Hardener
Back to
Hardener page
Product Description:
High-performance, medium-viscosity aliphatic polyamine curing agent. Fast curing at room temperature with a moderate gel time. Exhibits very low exudation, low odor, and minimum toxicity. Mix Ratio is 2:1 by volume or 47 phr. JEFFCO 3193 is solvent-free, 100% solids.
Product Uses:
Epoxy adhesive applications for thermoplastic substrates (such as battery cases) and chemical resistant coatings. |
| PROPERTIES OF 3193 HARDENER (neat): |
Minimum |
Maximum |
| Gel Time: Gel Time (minutes @ 77°F, 150 grams)
|
15
|
15
|
| Viscosity: @ 77°F, cps
|
3,000 |
3,000 |
|
Color: (Gardener)
|
Transparent Blue |
|
Weight Per Gallon: (lbs.)
|
8.64 |
8.64 |
|
Weight Per Active H:
|
|
|
|
Mix Ratio: Parts Per 100 Resin (by weight, 2:1 volume)
|
47 |
47 |
|
Thin Film Cure Time: (minutes @ 175°F)
|
|
|
|
Thin Film Set Time: @ 77°F (hours)
|
1.5
|
2
|
|
Cure Time: @ 75°F (hours)
|
|
|
|
Pot Life: (minutes @ 77°F, 150 grams)
|
|
|
|
TYPICAL CURED PROPERTIES WITH 1303 RESIN
|
Minimum |
Maximum |
|
Cure schedule: 40 minutes @ 140° F or 7 days at 77° F
|
|
HDT: (°F) ASTM D648-264
|
160
|
160
|
|
Shore D Hardness:
|
88 |
88 |
|
Barcol Hardness Units :
|
|
|
|
Flexural Strength: (psi)
|
15,000 |
15,000 |
|
Flexural Modulus: (psi)
|
|
|
|
Tensile Strength: (psi)
|
9,500 |
9,500 |
|
Tensile Modulus: (psi)
|
|
|
|
Elongation: %
|
|
|
|
Compressive Strength: (psi)
|
|
|
|
Bond Strength: psi ASTM C882
|
|
|
|
Water Absorption: %
|
2 |
2 |
|
Heat Deflection Temperature:
|
|
|
|
Heat Distortion Temperature: °C
|
|
|
|
Service Temperature: °F
|
|
|
|
Tensile Strain at Break: %
|
|
|
|
How Supplied:
Gallons, Pails, Drums
Back to
Hardener page
The information contained herein is offered without charge
for use by technically qualified personnel at their discretion and risk.
All statements, technical information and recommendations contained herein
are based on test and data which we believe to be reliable, but the accuracy
or completeness thereof is not guaranteed and no warranty of any kind
is made with respect thereto. Always read, understand, and comply with
hazard warnings described in the products' Material Safety Data Sheet(s)
before use.
|
