Home About Us MSDS PRODUCTS Contact Us Sample Request

JEFFCO 1301-AR

Enhanced Air Release Epoxy Resin

Back to Resins page

Product Description: Standard undiluted Bis-A formulation for general use. High viscosity, clear, rigid resin with low toxicity and odor. No solvents, 100% solids, DOT non-regulated. Product Uses: Filament winding, hand lay up laminating, vacuum bagging, tooling and pattern work, castings, adhesives, surface coatings and chemically resistant flooring.

Mixing: Use and store between 65°-80°F (product and ambient temperatures), 45°F minimum. Use below 45°F requires special hardener selection, consult with Jeffco sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise “released” prior to epoxy application. All JEFFCO Hardeners are compatible with JEFFCO 1301AR and should be proportioned in accordance with the selected JEFFCO Hardener mix ratio. Use of 1301AR resin in RTM or filament winding processes require specialized hardener(s) and equipment. Mix resin and hardener for 3-5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no more material than can be applied before the expiration of the pot life. Curing: JEFFCO 1301AR curing is determined by the selected JEFFCO hardener, see the hardener technical data sheet. How Supplied: Gallons, Pails, Drums Back to Resins page

The information contained herein is offered without charge for use by technically qualified personnel at their discretion and risk. All statements, technical information and recommendations contained herein are based on test and data which we believe to be reliable, but the accuracy or completeness thereof is not guaranteed and no warranty of any kind is made with respect thereto. Always read, understand, and comply with hazard warnings described in the products' Material Safety Data Sheet(s) before use.