JEFFCO 1304-T
Thixotropic Epoxy Resin
Back to
Resins page
Product Description:
Medium viscosity and thixotropic resin for reduced drainage in vertical applications or in laminates. Rigid Bis-A based epoxy with the lowest toxicity of any epoxy resin. Modified for improved air release and reinforcement wetting. 100% solids, DOT non-regulated.
Product Uses:
Hand lay up laminating, tooling and pattern work, adhesives and surface coatings.
|
| PROPERTIES OF 1304-T RESIN (neat): |
Minimum |
Maximum |
|
Viscosity: |
2,700 |
3,300 |
|
EEW units |
190 |
196 |
|
Weight Units: |
9.5 |
9.6 |
|
Colors: |
Milky White Translucent Liquid |
|
Mixing:
Use and store between 65° -80° F (product and ambient temperatures), 45° F minimum. Use below 45° F requires special hardener selection, consult with Jeffco sales personnel for recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Wax or "release" mold surfaces before epoxy application. All JEFFCO curing agents are compatible with JEFFCO 1304T so proportion resin per the selected JEFFCO hardener. Mix resin and hardener for 3-5 minutes being certain to scrape the mixing container bottom and sides. Mix no more material than may be applied before pot life expiration.
Curing:
JEFFCO 1304T cures overnight at typical ambient temperatures (65° - 80° F) with full properties developing in 7 days, see hardener data for specific cure schedules and properties.
How Supplied:
Pails, Drums
Back to
Resins page |
The information contained herein is offered without charge
for use by technically qualified personnel at their discretion and risk.
All statements, technical information and recommendations contained herein
are based on test and data which we believe to be reliable, but the accuracy
or completeness thereof is not guaranteed and no warranty of any kind
is made with respect thereto. Always read, understand, and comply with
hazard warnings described in the products' Material Safety Data Sheet(s)
before use.
|
