Home About Us MSDS PRODUCTS Contact Us Sample Request

JEFFCO 1311

Intermediate Viscosity Epoxy Resin

Back to Resins page

Product Description: Rigid epoxy resin, based on Bis-A. Viscosity intermediate between 1308 and 1303 for medium build and fast wetting of reinforcement materials. 100% solids, clear, and highly resistant to crystallization in cold environments. No VOC’s and DOT non-regulated. Product Uses: Hand lay up laminating, general purpose tooling and pattern work.

Mixing: Recommend JEFFCO 1311 be used between 65° -85° F (product and ambient temperatures). Use below 45° F requires special hardener selection, consult with Jeffco sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise "released" prior to epoxy application. All Jeffco curing agents are compatible with JEFFCO 1311 so proportion resin and hardener in accordance with the selected Jeffco hardener. Mix resin and hardener for 3-5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no material than may be applied before the expiration of the pot life.    Curing: JEFFCO 1311 cures overnight at typical ambient temperatures (65° -85° F) with full properties developing in 7 days, see hardener data for specific cure schedules and properties.    How Supplied: Pails, Drums Back to Resins page

The information contained herein is offered without charge for use by technically qualified personnel at their discretion and risk. All statements, technical information and recommendations contained herein are based on test and data which we believe to be reliable, but the accuracy or completeness thereof is not guaranteed and no warranty of any kind is made with respect thereto. Always read, understand, and comply with hazard warnings described in the products' Material Safety Data Sheet(s) before use.