JEFFCO 1315
Low Viscosity Epoxy Resin
Back to
Resins page
Product Description:
Low viscosity, bis-A based epoxy resin, containing BGE for best retention of physical properties. Fast wetting of reinforcement materials. 100% solids, clear, zero VOC’s.
Product Uses:
Marine laminating and adhesives, vacuum bagging, casting, fairing compounds.
|
| PROPERTIES OF 1315 RESIN (neat): |
Minimum |
Maximum |
|
Viscosity: |
500 |
700 |
|
EEW units |
175 |
195 |
|
Weight Units: |
9.5 |
9.5 |
|
Colors: |
1 (Gardner) |
|
Mixing:
Recommend JEFFCO 1315 be used between 65° -85° F (product and ambient temperatures). Use below 45° F requires special hardener selection, consult with Jeffco sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise "released" prior to epoxy application. All Jeffco curing agents are compatible with JEFFCO 1315 so proportion resin and hardener in accordance with the selected Jeffco hardener. Mix resin and hardener for 3-5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no material than may be applied before the expiration of the pot life.
Curing:
JEFFCO 1315 cures overnight at typical ambient temperatures (65° -85° F) with full properties developing in 7 days, see hardener data for specific cure schedules and properties.
How Supplied:
Pails, Drums
Back to
Resins page |
The information contained herein is offered without charge
for use by technically qualified personnel at their discretion and risk.
All statements, technical information and recommendations contained herein
are based on test and data which we believe to be reliable, but the accuracy
or completeness thereof is not guaranteed and no warranty of any kind
is made with respect thereto. Always read, understand, and comply with
hazard warnings described in the products' Material Safety Data Sheet(s)
before use.
|
