JEFFCO 1346-Gel
White, Thixotropic Gel Epoxy Resin
Back to
Resins page
Product Description:
White, highly thixotropic rigid epoxy resin with excellent physical properties. Very high resin viscosity for high build applications or repairs. Holds heavy tooling fabrics in place during cure. 100% solids, highly resistant to crystallization, Zero VOC’s and DOT non-regulated.
Product Uses:
Overhead work, general purpose repairs, adhesives and "coving" applications (with 3146 GEL hardener). Used where a white color is desired.
|
| PROPERTIES OF 1346-Gel RESIN (neat): |
Minimum |
Maximum |
|
Viscosity: |
22,000 |
22,000 |
|
EEW units |
189 |
192 |
|
Weight Units: |
9.7 |
9.8 |
|
Colors: |
White |
|
Mixing:
Recommend JEFFCO 1346 GEL be used between 65° -85° F (product and ambient temperatures). Use below 45° F requires special hardener selection, consult with Jeffco sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise "released" prior to epoxy application. All Jeffco curing agents are compatible with JEFFCO 1346 GEL so proportion resin and hardener in accordance with the selected Jeffco hardener. Mix resin and hardener for 3-5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no material than may be applied before the expiration of the pot life.
Curing:
JEFFCO 1346 GEL cures overnight at typical ambient temperatures (65° -85° F) with full properties developing in 7 days, see hardener data for specific cure schedules and properties.
How Supplied:
Pails
Back to
Resins page |
The information contained herein is offered without charge
for use by technically qualified personnel at their discretion and risk.
All statements, technical information and recommendations contained herein
are based on test and data which we believe to be reliable, but the accuracy
or completeness thereof is not guaranteed and no warranty of any kind
is made with respect thereto. Always read, understand, and comply with
hazard warnings described in the products' Material Safety Data Sheet(s)
before use.
|
