Home About Us MSDS PRODUCTS Contact Us Sample Request

JEFFCO 1382

Low Modulus Flexible Epoxy Resin

Back to Resins page

Product Description: Low viscosity, flexible epoxy resin modified for added adhesion properties and flexibility. Quickly wets reinforcement materials. 100% solids, highly resistant to crystallization in cold environments. Light amber color. No VOC’s and DOT non-regulated. Product Uses: Flexible coatings, joint compounds, mortars, grouts, highly filled compounds, flexible laminates, and adhesives.

Mixing: Recommend JEFFCO 1382 be used between 65° -85° F (product and ambient temperatures). Use below 45° F requires special hardener selection, consult with Jeffco sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise "released" prior to epoxy application. All Jeffco curing agents are compatible with JEFFCO 1382 so proportion resin and hardener in accordance with the selected Jeffco hardener. Mix resin and hardener for 3-5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no material than may be applied before the expiration of the pot life.          Curing: JEFFCO 1382 cures overnight at typical ambient temperatures (65° -85° F) with full properties developing in 7 days, see hardener data for specific cure schedules and properties.         How Supplied: Gallons, Pails, Drums, Tote Bin Back to Resins page

The information contained herein is offered without charge for use by technically qualified personnel at their discretion and risk. All statements, technical information and recommendations contained herein are based on test and data which we believe to be reliable, but the accuracy or completeness thereof is not guaranteed and no warranty of any kind is made with respect thereto. Always read, understand, and comply with hazard warnings described in the products' Material Safety Data Sheet(s) before use.