JEFFCO 908-SC
Production Epoxy Face Coat
Back to
Resins page
Product Description:
Non-sag epoxy surface coat. Thixotropic yet flows and brushes for easy application. 100% solids, no VOC’s. DOT non-regulated. Standard colors are black and white.
Product Uses:
Surface coatings on epoxy patterns and molds. Also used where thixotropic bonding or coating is desired. Ambient cures with JEFFCO 3102 and 3103 hardeners. High temp usage with 3137 hardener.
|
| PROPERTIES OF 908-SC RESIN (neat): |
Minimum |
Maximum |
|
Viscosity: |
22,000 |
22,000 |
|
EEW units |
|
|
|
Weight Units: |
12.0 |
12.2 |
|
Colors: |
White, Light Blue or Gray |
|
Mixing:
Use and store between 65° -80° F. Surfaces must be free of contaminants such as dirt, oil, grease, or water. Wax or "release" mold surfaces before epoxy application. Mix 908-SC with all listed hardeners at 100:17 by weight (4:1 by volume). Mix JEFFCO 3102 in small batches due to brief pot-life.
Curing:
Use and store between 65° -80° F. Surfaces must be free of contaminants such as dirt, oil, grease, or water. Wax or "release" mold surfaces before epoxy application. Mix 908-SC with all listed hardeners at 100:17 by weight (4:1 by volume). Mix JEFFCO 3102 in small batches due to brief pot-life.
How Supplied:
Gallon Tubs, Pails, Drums
Back to
Resins page |
The information contained herein is offered without charge
for use by technically qualified personnel at their discretion and risk.
All statements, technical information and recommendations contained herein
are based on test and data which we believe to be reliable, but the accuracy
or completeness thereof is not guaranteed and no warranty of any kind
is made with respect thereto. Always read, understand, and comply with
hazard warnings described in the products' Material Safety Data Sheet(s)
before use.
|
