JEFFCO sp1316
White Epoxy Tooling Resin
Back to Specialties page
System SKU: sp1316
System Category: Specialty
DESCRIPTION:
White, medium viscosity, rigid epoxy resin with excellent physical properties. Mildly thixotropic resin viscosity wets reinforcements quickly and holds heavy tooling fabrics in place during cure. 100% solids, highly resistant to crystallization, zero VOC’s and DOT non-regulated.
APPLICATIONS:
Hand lay up laminating, tooling and pattern work. Used where a white color is desired.
MIXING: Recommend JEFFCO 1316 be used between 65°-85°F (product and ambient temperatures). Use below 45°F requires special hardener selection, consult with Jeffco sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise “released” prior to epoxy application. All Jeffco curing agents are compatible with JEFFCO 1316 so proportion resin and hardener in accordance with the selected Jeffco hardener. Mix resin and hardener for 3-5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no material than may be applied before the expiration of the pot life.
CURING: JEFFCO 1316 cures overnight at typical ambient temperatures (65°-85°F) with full properties developing in 7 days, see hardener data for specific cure schedules and properties. |
| PROPERTIES OF sp1316 SYSTEM LIQUID PROPERTIES (77ºF): |
Minimum |
Maximum |
| Resin Viscosity (Part "A")
|
3,500 |
3,800
|
| Hardener Viscosity (Part "B")
|
|
|
| Mixed Viscosity
|
1,025
|
4,200
|
| Mix Ratio
, Part
|
:1
|
:1
|
| Pot Life, minutes @ 77ºF
|
|
|
| Weight Per Gallon, Resin
Part “A” (lbs.)
|
|
|
| Weight Per Gallon, Hardener
Part “B” (lbs.)
|
|
|
Color, Resin
|
|
Color, Hardener
|
|
|
CURED PHYSICAL PROPERTIES OF NEAT RESIN:
| NEAT RESIN CURED PROPERTIES OF sp1316 SYSTEM: |
Minimum |
Maximum |
| Shore D Hardness
|
77 |
85 |
| Tensile Strength
|
30,000 |
>30,000 |
| Flexural Strength
|
32,000 |
>32,000 |
| Compressive Strength
|
20,000 |
>20,000 |
| HDT, ºF
|
185 |
>185 |
| Elongation
|
3 |
4 |
|
SUPPLIED AS PACKAGED KITS:
Quart, Gallon, Pails, Drums
Back
to Specialties page
The information contained herein is offered without charge
for use by technically qualified personnel at their discretion and risk.
All statements, technical information and recommendations contained herein
are based on test and data which we believe to be reliable, but the accuracy
or completeness thereof is not guaranteed and no warranty of any kind
is made with respect thereto. Always read, understand, and comply with
hazard warnings described in the products' Material Safety Data Sheet(s)
before use.
|
