JEFFCO sp9601
GP Potting, Casting and Encapsulation Epoxy System
Back to Specialties page
System SKU: sp9601
System Category: Specialty
DESCRIPTION:
Potting and encapsulating resin with good chemical resistance. Long pot life and medium viscosity for good component penetration and coating. Low exotherm that will not harm delicate circuitry. Cures in the presence of moisture and humidity. Highly shock and corrosion resistant. Easy to use 1:1 volumetric mix ratio. White “A” and black “B”, mix to gray.
APPLICATIONS:
Electrical potting, encapsulation, general purpose castings, low exothermal void filling compound, corrosion and shock resistant high build coatings. Excellent general purpose use.
MIXING: Use between 65°-80°F (product and ambient temperatures), 45°F minimum. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Proportion “A” and “B” 1:1 by volume and mix for 3-5 minutes being certain to blend into a uniform gray with no visible stripping. Mix no more material than may be applied before the expiration of the pot life.
POTTING & ENCAPSULATING: Pour mixed material over properly positioned device to be coated in one single mass. Do not pour more than 2lbs or more than 1” thick as exothermic temperature may exceed circuitry tolerances. Allow 2-3 hours set time prior to disturbing coated area. In 24 hours the encapsulated parts may be shipped. Full properties are developed in 7 days at ambient temperatures.
ADDITIONAL PROPERTIES OF 9601 EPOXY SYSTEM (A & B Mixed):
Color Gray
Mixed Weight per Gallon 11.9lbs
Thermal Conductivity .44 (BTU/ft/h-ft2 per °F
Impact Resistance >150 inch/lb
Bond Strength 1,300psi
Water Absorption <1% (24 hours) |
| PROPERTIES OF sp9601 SYSTEM LIQUID PROPERTIES (77ºF): |
Minimum |
Maximum |
| Resin Viscosity (Part "A")
|
|
|
| Hardener Viscosity (Part "B")
|
|
|
| Mixed Viscosity
|
7,000
|
7,000
|
| Mix Ratio
, Part
|
1
:1
|
1
:1
|
| Pot Life, minutes @ 77ºF
|
50
|
60
|
| Weight Per Gallon, Resin
Part “A” (lbs.)
|
|
|
| Weight Per Gallon, Hardener
Part “B” (lbs.)
|
|
|
Color, Resin
|
|
Color, Hardener
|
|
|
CURED PHYSICAL PROPERTIES OF NEAT RESIN:
| NEAT RESIN CURED PROPERTIES OF sp9601 SYSTEM: |
Minimum |
Maximum |
| Shore D Hardness
|
|
|
| Tensile Strength
|
5,000
|
6,000
|
| Flexural Strength
|
|
|
| Compressive Strength
|
|
|
| HDT, ºF
|
125
|
125
|
| Elongation
|
10
|
10
|
|
SUPPLIED AS PACKAGED KITS:
2 gallon, 10 gallon, 100 gallon
Back
to Specialties page
The information contained herein is offered without charge
for use by technically qualified personnel at their discretion and risk.
All statements, technical information and recommendations contained herein
are based on test and data which we believe to be reliable, but the accuracy
or completeness thereof is not guaranteed and no warranty of any kind
is made with respect thereto. Always read, understand, and comply with
hazard warnings described in the products' Material Safety Data Sheet(s)
before use.
|
